- rectangular / square tray, flat bottom
- adjustment range of the tray in 5 standard pallet dimensions up to 2000x1200mm
- tray made of PE: chemical resistant, food-safe, UV-stabilized
- seamlessly produced through the rotary melt process
- tray color: natural-transparent (optically white) or black
- approved by DIBt (German Institute for Structural Engineering)
- safe filling, installation and correct storage of water-hazardous liquids in KTC, IBC, dosing containers, storage tanks and drums
| Type | Outer-Ø mm | Lid mm | Lid type | Emptying mm | Total height mm | Wide mm | Length mm | Height mm | Cone Degree | Footprint Length mm | Footprint Wide mm | Palettes incl. | Depth mm | Payload kg |
Volume liters |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WR-36 | 375 | 415 | 275 | 350 | 36 | ||||||||||
| WR-40 | 445 | 645 | 150 | 600 | 40 | ||||||||||
| WR-75 | 645 | 845 | 150 | 800 | 75 | ||||||||||
| WR-80 | 445 | 645 | 295 | 600 | 80 | ||||||||||
| WR-145 | 860 | 1260 | 165 | 1200 | 145 | ||||||||||
| WR-150 | 645 | 845 | 295 | 800 | 150 | ||||||||||
| WR-190 | 1060 | 1260 | 170 | 1200 | 190 | ||||||||||
| WR-235 | 1260 | 1260 | 175 | 1200 | 235 | ||||||||||
| WR-315 | 1260 | 2060 | 170 | 1200 | 2000 | 315 | |||||||||
| WR-320 | 860 | 1260 | 335 | 1200 | 320 | ||||||||||
| WR-410 | 1060 | 1260 | 335 | 1200 | 410 | ||||||||||
| WR-450 | 1260 | 2460 | 175 | 1200 | 2400 | 450 | |||||||||
| WR-510 | 1260 | 1260 | 345 | 1200 | 510 | ||||||||||
| WR-750 | 1260 | 2060 | 335 | 1200 | 2000 | 750 | |||||||||
| WR-765 | 1260 | 1260 | 515 | 1200 | 765 | ||||||||||
| WR-1010 | 1260 | 1260 | 690 | 1200 | 1010 | ||||||||||
| WR-1200 | 1260 | 2060 | 500 | 1200 | 2000 | 1200 | |||||||||
| WR-1290 | 1260 | 1260 | 860 | 1200 | 1290 | ||||||||||
| WR-1500 | 1260 | 2460 | 515 | 2400 | 1200 | 1500 |
The collecting tray WR is an adjustment tray with a flat bottom. The tray allows for the clean bottling and decanting, installation and storage of liquids from and into containers. The tray is made out of stabilized LLD-PE (low-linear density polyethylene), thus there is a good chemical resistance. The temperature resistance of our products is in between -20 ° C and + 60 ° C. The collecting tub is seamlessly manufactured through the rotary melting process. The collecting tray is available in the colors natural-transparent or black.
The approval according to the DIBt (German Institute for Structural Engineering), Berlin) is valid for the entire combination of containers and collection devices, if the collecting device is approved. The ARICON trays of the types collecting tray WR, safety tray WRL and safety pallet WRP are approved by the DIBt!
Dosing containers of the series FD, round containers of the series SBO, -SB or -SBC, collection containers of the series CTB and storage tanks LTV (all with a maximum capacity of 1000 liters) installed in or on a DIBT-approved collection unit comply with the requirements of the WHG Water House Law) for the storage of water-hazardous liquids.
